Brightness Adjustment Of The Display; Operation Mode - JVC GR-DV4000 Instructions Manual

Brightness Adjustment Of The
Display
1
Set the Power Switch to "M" or "PLAY" while
pressing down the Lock Button located on the
switch.
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
3
Press the MENU Wheel in. The Menu Screen
appears.
4
Rotate the MENU Wheel to select "n", and
press it. The CAMERA DISPLAY Menu appears.
5
Rotate the MENU Wheel to select "BRIGHT",
and press it. The Menu Screen closes and the
brightness control indicator appears.
6
Rotate the MENU Wheel until the appropriate
brightness is reached.
7
Press the MENU Wheel in.
● It is also possible to adjust the brightness of the
viewfinder.
BR I GHT

Operation Mode

To turn on the camcorder, set the Power Switch to
any operation mode except "OFF" while pressing
down the Lock Button located on the switch.
Power Switch
Lock Button
VIDEO/MEMORY Switch
Choose the appropriate operation mode according
to your preference using the Power Switch and
VIDEO/MEMORY Switch.
Downloaded From VideoCamera-Manual.com Manuals
MENU Wheel
Power Lamp
Power Switch Position
A (Full Auto Recording):
Allows you to record using NO special effects or
manual adjustments. Suitable for standard
recording.
The "A" indicator appears on the display.
M (Manual Recording):
Allows you to set various recording functions
using the Menus. ( pg. 31)
If you want more creative capabilities than Full
Auto Recording, try this mode.
There is no indication on the display.
OFF:
Allows you to switch off the camcorder.
PLAY:
● Allows you to play back a recording on the tape.
● Allows you to play back a video clip on the
memory card.
● Allows you to display a still image stored in the
memory card or to transfer a still image stored in
the memory card to a PC.
● Allows you to set various playback functions
using the Menus. (
VIDEO/MEMORY Switch Position
VIDEO:
Allows you to record on a tape or play back a
tape. If "REC SELECT" is set to "
( pg. 39), still images are recorded both on the
tape and the memory card.
MEMORY:
● Allows you to record in a memory card or
access data stored in a memory card.
● When the Power Switch is set to "A" or "M", the
currently selected image size appears.
Power-Linked Operation
When the Power Switch is set to "A" or "M", you
can also turn on/off the camcorder by opening/
closing the LCD monitor or pulling out/pushing in
the viewfinder.
13
EN
pg. 31)
/ "