2. Installation
1. Insert the SIM card provided by your 4G mobile network operator.
2. Insert the antennas into the antenna
connectors on the DWR-956. Rotate the
connector end of the antenna to fasten it.
3. Insert the Ethernet cable into one of the LAN ports on the rear
panel of the DWR-956. Insert the other end of this Ethernet cable
into the port of the computer. You can also use the default WPA key
to connect Wi-Fi devices to the DWR-956 directly. The default SSID
and WPA key is listed on the label attached to the rear panel of the
DWR-956.
9