HP ProLiant MicroServer Generation 8 Quickspecs page 4

QuickSpecs
Standard Features
Internal Storage
Devices
Maximum Internal
Storage
Interfaces
Industry Standard
Compliance
Server Power Cords
Power Specifications To review typical system power ratings use the HPE Power Advisor which is
Optical Drive
Hard Drives
Non-Hot Plug SATA
Video
HPE iLO Remote
Management
Network Port
Micro SD slot
USB 2.0 Ports
USB 3.0 Ports
Network RJ-45
(Ethernet)
ACPI V2.0b Compliant
PCIe 2.0 Compliant
PXE Support
WOL Support
USB 2.0
USB 3.0
SATA Gen 2
SATA Gen 3
The MicroServer models ship standard with a 6' country specific NEMA power cord.
If customers require an alternative local power cord, they can check the power cord
matrix for the appropriate country specific sku. Please see the following power cord
matrix: http://www.hp.com/go/powercordmatrix.
available via the online tool located at URL: http://www.hp.com/go/proliant-energy-
efficient or http://www.hp.com/go/hppoweradvisor.
NOTE: See Technical Specifications section at end of QuickSpecs for Power
Specifications.
DA - 14565 Worldwide QuickSpecs — Version 24 — 12.17.2015
HPE ProLiant MicroServer Generation 8 (Gen8)
Optional: SATA DVD-RW drive
None ship standard
16TB (4 x 4TB) 3.5" SATA
1 Rear standard video
1Gb Dedicated (default iLO4 configuration)
1 Internal
NOTE: The MicroSD slot is not a hot-pluggable device.
Customers should not attempt to plug a MicroSD card into the
MicroSD slot while the server is powered.
5 total (2 front, 2 rear, 1 internal)
2 total (2 rear)
NOTE: Functional after OS boot.
2 (Port 1 shared for HPE iLO4 as optional configuration)
Page 4