Yamaha musiccast Quick Manual page 30

Listening from the MusicCAST client
For wireless connections, the network signal icon denotes the
strength of the signal between the MusicCAST client and
server, and only appears if the MusicCAST client and server
network settings are configured correctly.
When the MusicCAST client is not receiving a signal from a
MusicCAST server, the
the MusicCAST client closer to the MusicCAST server, and
remove as many objects from between the two components as
possible, until the display shows the wireless network
connection icon. The bars on the right of the network
connection icon indicate the strength of the network signal the
MusicCAST client is receiving. The more bars displayed, the
stronger the signal received.
When the network signal icon completely fails to display, you
should connect the components using a network cable. Refer to
the accompanying setup guide for more information. The wired
network connection icon appears on the MusicCAST client on-
screen display when the network settings are correctly
configured.
When the MusicCAST client is in standby mode, press
STANDBY/ON to switch the power on.
The MusicCAST client consumes a small amount of power
even when it is in sleep or standby mode.
icon appears. In this case, move
30