Listening From The Musiccast Client; Check The Client Network Connection - Yamaha musiccast Quick Manual

Listening from the MusicCAST client

You can use the MusicCAST client to listen to songs stored on the MusicCAST server using the process
described on page 15. Use album, artist, genres, or song names to search for songs you want to listen to.
Refer to the MCX-A10 owner's manual for further information on how to use the MusicCAST client.
• Configure the network settings on your MusicCAST client before attempting to playback music from it. See page 12 for an
explanation of how to do this.
• Turn the MusicCAST server power on before attempting to playback material.

Check the client network connection

Press STANDBY/ON
Check that the network connection icon appears in the MusicCAST
client on-screen display. One of the following three icons appears:
NOTE
If the MusicCAST client is in sleep mode press SLEEP on the
remote control to turn the MusicCAST client on.
Network Signal Icon
29 29
STANDBY/ON
Wired Network Connection Icon
Wireless Network Connection Icon
No Connection Icon