Yamaha musiccast Quick Manual page 22

Storing CDs on the MusicCAST server
3 Use / to move the cursor to "Edit title" and
press SELECT.
The character entry screen appears:
4 Use / / / to move the cursor to a character,
and press SELECT.
You can use a PS/2 keyboard to enter characters directly if you
have connected one to your MusicCAST server. In this case,
the characters you enter appear in the character entry screen in
the same manner as characters entered using on-screen entry.
For a more detailed explanation, see page 78 of the MCX-1000
owner's manual.
NOTE
Disconnect the MusicCAST server from the AC outlet prior to
connecting a PS/2 keyboard, and do not reconnect it to an AC
outlet until you have finished connecting the PS/2 keyboard to
the PS/2 ports on the front panel of the MusicCAST server.
5 When you finish entering characters, use / /
/ to move the cursor to "OK" and press
SELECT.
If you wish to stop entry without changing the title, select
"CANCEL".
6 Repeat steps 2–4 to enter all the song titles.
HINT
HINT
Song selection is even easier if you enter more data, such as
artist, album, and genre names for the songs stored in the
MusicCAST server.
Press SUBMENU on the artist, album, or genre screens to
access the submenu screens and use the same procedure as
described here to edit names.
22