Daewoo DVG-9000N Owner's Manual page 37

Hide thumbs Also See for DVG-9000N:
Table of Contents

Advertisement

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘ ` 37
FUNCTION SETTING (Continued)
You may select according to the colour
system of the TV to be connected.
¥ Select "AUTO" for a multi-system TV.
¥ Select "NTSC" for a NTSC TV.
¥ Select "PAL" for a PAL TV.
¥ Select "AUTO" for automatically setup.
¥ Select "HI-RES" for high-resolution picture.
¥ Select "N-FLICKER" for no flicker picture.
¥ Select "P-YUV" for connecting Component
output.
¥ Select "P-RGB" for connecting VGA
output.
¥ Select "P-OFF" for connecting VIDEO
output.
This only works when there is an angle
mark on the disc.
¥ Select "ON",the screen shows the mark
when playing a DVD.
¥ Select "OFF",the mark is not shown .
¥ ENGLISH
¥ FRENCH
¥ SPANISH
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
TV TYPE
PIC MODE
SCAN MODE
ANGLE MARK
OSD LANGUAGE
The OSD is in English.
The OSD is in French.
The OSD is in Spanish.
AUDIO OUT
¥ ANALOG: No signal is output from the
coaxial, optical port.
¥ SPDIF/RAW: Select this when the DVD
player is connected with a power
amplifier through coaxial port, refer to
page 18. When a Dolby Digital DVD,
DTS DVD or MPEG DVD is played,
the coaxial port will output in the
corresponding digital(Source code)
format. The power amplifier to be
connected must have Dolby Digital,
DTS and MPEG decoding.
¥ SPDIF/PCM: Select this when the DVD
player is connected with a 2-channel
digital mode or stereo amplifier (refer
to page 18 for the connection). When a
Dolby Digital or MPEG DVD is
played, the coaxial port will output in
PCM 2-channel format.
Notes:
In case of selecting SPDIF/RAW or
SPDIF/PCM, no signal is output from the
audio analog output.
CAPTIONS
CAPTION was invented for hearing
impaired person. But it is very useful
when learning foreign languages. If your
TV supports closed caption, select ON. If
not, closed caption wonÕt be displayed.
¥ ON : The hidden subtitle is shown.
¥ OFF : The hidden subtitle is turned off.
SCREEN SAVER
Start the screen saver, the screen saver
image appears when the unit stops or
the image is frozen for a few minutes.
This saver can keep the screen from
being damaged.
¥ ON: Start the screen saver.
¥ OFF: Remove the screen saver.
• 37 •

Advertisement

Table of Contents
loading

Table of Contents