Basic Operations; Play Discs - Daewoo DVG-9000N Owner's Manual

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘ ` 19

BASIC OPERATIONS

PLAY DISCS

TV/AUDIO SELECTION
Press
system.
1. Press "TV/VIDEO" on the TV, select
¥ Select S-VIDEO mode if using an ÔSÕ
2. Select the right audio input on the
¥ Each amplifier is different from
(e.g., connect the audio output of the
DVD player to the DVD audio input of
an amplifier.)
Notes: This step can be cancelled if
you do not connect it to the amplifier.
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
on the TV and audio
VIDEO mode (TV).
Video connection.
amplifier.
another, please refer to the manual of
the amplifier.
DVD/LD
1. Press
STANDBY/ON
2. Press
a disc with the label side.
3. Press
The unit begins to read the disc.
TV/VIDEO
- FRONT PANEL -
4. Press
AFTER STEP4 IS FINISHED:
¥ PLAY DVD
The TV screen shows the DVD
menu and title menu.
¥ PLAY SUPER-VCD, VCD2.0
The TV screen shows the menu, the
unit enters PBC status.
¥ PLAY CD, VCD1.1, MP3
Press
according to the track numbers.
5. Stop playback.
Press
¥ You have to press this
button twice to stop
the playback of a
DVD.
6. Unload the disc and
turn off the unit. Press
Notes: If the power is not turned on,
check whether the power switch on
the rear of DVD is turned on.
to turn on the unit.
or
to open the disc tray and load
again to close the disc tray.
or
- REMOTE CONTROL -
to play the disc.
PLAY
, the unit plays the disc
PLAY
.
and STANDBY/ON again.
• 19 •