Rear Panel - Daewoo DVG-9000N Owner's Manual

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘ ` 15
PREPARATIONS BEFORE OPERATION (Continued)

REAR PANEL

! DIGITAL AUDIO COAXIAL/OPTICAL OUT
@ VIDEO OUT
# 5.1 CHANNEL ANALOGUE AUDIO OUT
$ S-VIDEO OUTPUT
% COMPONENT(Y/Pb/Pr) VIDEO OUT
^ VGA OUT
& POWER SUPPLY SOCKET WIRE
* POWER SWITCH
Notes:
¥ Remove the dust protection cap from the optical digital audio output connector and connect the
¥ Do not connect to the digital audio input of an amplifier that does not have Dolby Digital and dts
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
Connects digital audio under play mode into an AV amplifier or a receiver equipped with
digital audio decoder for you to enjoy the theatre-quality sound in your home.
Connects composite video signal to input AV or PHONO sockets of TV or monitor to
achieve high fidelity colour reproduction.
In Dolby Digital and dts, total 6 channels are used. 3 channels for front, 2 channels for
surround and 1 channel for subwoofer. They are front left, front right, center, subwoofer,
rear left and rear right. L stands for front left, R for front right, C for center, LFE for
subwoofer, LS for rear left surround and RS for rear right surround.
Connects to TV or monitor equipped with S-VIDEO input. In order to achieve a sharper
and cleaner picture than that when connected via VIDEO OUT (composite video).
Connects to TV or monitor equipped with Component input . In order to achieve a sharper
and cleaner picture than that when connected via VIDEO OUT (composite video).
Connects to PC monitor. In order to achieve a sharper and cleaner picture than that when
connected via VIDEO OUT (composite video).
Creates POWER between wall outlet and the unit.
Turn on or off the main power.
- ON : Press Ò Ò.
- OFF : Press Ò Ò.
cable firmly so that the configurations of both the cable and connector match.
decoder when you set the digital out option of setup information to SPDIF/RAW.
• 15 •