The Help Line - Competition Electronics Turbo35-GFX User Manual

When you first turn on the T35-
GFX, the display will show the
sign-on message, including the
firmware revision number.
This number corresponds to the
version of software in the T35-
GFX. From time to time, CEI
upgrades this software, either to fix
firmware "bugs" or to add new
features. The firmware revision
number may be important if your
T35-GFX needs service; see "When
it doesn't work" for more details
about this.
The T35-GFX has three buttons on the front panel, as well as a combination rotary
dial/push button. The buttons are as follows:
Figure 4. T35-GFX front panel controls.
series.
As you advance from page to page, individual lines appear on each page. Upon entry to a
page, the top line will be highlighted, indicating it is the currently selected line.
To navigate to individual lines on a page, use the large rotary dial; just push it in to
navigate to the next line on the display.
Some values are adjustable, and some are simply informational and cannot be changed. If
you are on a line that can be adjusted, in general, rotating the dial CW or CCW will
increase/decrease the value.

The Help Line

As you highlight the various lines, a context sensitive, scrolling help line will appear at
the bottom of the display. You can always see the details for the selected line, such as
what range it can be adjusted over, etc. Also, if applicable, you will see additional
Figure 3. Sign-on Screen.
Start/Stop: used to start and
stop the selected function.
Mode: This button is used to
cycle through the six main
functions, detailed below.
Page: This button will cycle
through the various screens
associated with each function.
Use the Mode and Page buttons
to navigate to the desired page,
or screen containing the
parameter(s) you want to view or
change. In either case, when you
get to the last Mode or Page,
pushing the button again will go
to the first Mode or Page of the
9