Applying Your Blood Pressure Cuff - Veridian Healthcare 01-5021 Instruction Manual

APPLYING YOUR BLOOD PRESSURE CUFF

PROPER CUFF FIT AND PLACEMENT IS CRITICAL IN OBTAINING
ACCURATE BLOOD PRESSURE MEASUREMENTS. PLEASE READ THESE
INSTRUCTIONS CAREFULLY AND CONSIDER CONSULTING WITH YOUR
PHYSICIAN FOR FURTHER DIRECTION.
Before applying your blood pressure cuff, be sure you have selected
the appropriate size cuff.
To determine the proper cuff size, measure the circumference of your
left upper arm at the point midway between inside bend of your
elbow and your shoulder, Fig 1.
Adult Cuff ts arm circumference 11-3/4" - 16-1/2" (30-42 cm)
Large Adult Cuff ts arm circumference 16-1/2" - 18-7/8" (42-48 cm)
Additional cuff sizes are available for order on the enclosed order
form.
If for any reason you are unable to or should not use your left arm,
please modify the instructions for cuff application to your right arm.
Your physician can help you identify which arm is best for you to
take measurements from.
1. The cuff should not be plugged into the monitor until after the
cuff is applied to your arm.
2. Remove any constrictive clothing or jewelry that may interfere
with cuff placement.
3. Be seated at a table or desk with your feet at on the oor.
4. Position the cuff on a solid surface with the tubing facing up and
away from you. The metal ring/bar on the cuff should be to the
left of the tubing.
Fig. 1
E E N N G G L L I I S S H H • • 9 9