Lenovo ThinkStation P900 User Manual page 133

a. On the right of the PCI card slot, pivot the tab
opened. On the left of the PCI card slot, lift the handle
left until it stops. The card latch
Figure 76. Opening PCI card latches
b. Disconnect the power cable from the full-length PCI Express card, and then grasp the card that is
currently installed and gently pull it out of the slot.
Notes:
– If the card is held in place by a retaining latch, press the card retaining latch
disengage the latch. Grasp the card and gently pull it out of the slot.
– The card fits tightly into the card slot. If necessary, alternate moving each side of the card a small
amount until it is removed from the card slot.
1 outward until it stops. The card latch
4
3
is opened.
3
Chapter 9
until it stops, and then pivot it to the
2
1 as shown to
.
Installing or replacing hardware
2 is
1
121