GE JET230 How To Get The Best page 9

/'
of to ILkw
Piace covered food in
oven. Touch Auto Cook
pad. "Enter Code" flashes
on readout,
Touch number pad for
desired code. Code 2
shows and "Start" flashes
on readout, Touch START,
Word AUTC) shows on
readout, indicating st~am
sensor is activated, DO
NOT OPEN DOOR MAY
E3eep sounds when steam
is sensed and AUTO is
replaced by cook time. At
this point, door may be
AFFECT COOKING PER-
FORMANCE,
opened to check foods if
desired, When done, oven
beeps and stops,
NOTE: Refer to Automatic Cooking Chart on oven when door is open and also on pages 26 and 27 of this book.
Automatic cooking codes 1 through 9 are designed to
Code 1, which has the least power, is used for quick
give you easy automatic results with a number of reheating jobs while the longer" cooking foods like
foods.
stew or chili use higher codes, A Cooking Chart and
Codes are arranged in lowest to highest amount of
recipes, starting on page 20 give many tested uses for
power. For example, Code 1 gives least microwave
automatic cooking codes. Remembering that you can
cooking power, Code 2 gives more power than Code
adjust the power up or down by increasing or decreas-
1, Code 3 increases power over Code 2 and so on.
ing the Code will give you added flexibility.
Another feature to give you more flexibility in Auto- tables more done than you like them, set Code 41 next
matic Cooking is the preference control, which can be time and you will get 20°/0less cooking time.
used to "fine tune" the power of Codes 2 through 9. By
Likewise, if you wish slightly more time than a code
simply adding a 1 after.a Code, you can set the oven to
delivers, add a 9 after the Code. For the vegetables in
cook using 20°/0less time than the code would regu-
the example above, Code 49 would provide 20°/0more
Iarly deliver, For example, if Code 4 cooks your vege-
time for cooking than would the regular Code 4.
TOUC17 number pads 4 and 1 in that
order. Code 4 shows and "Start"
I ouch Auto Cook Pad. "Enter
Code" flashes on readout.
flashes on readout.
9
Touch START. AIJTC) shows on
readout display. If you wish to
check foods", open door after first
oven signal. Close door and touch
START,