Table of Contents
Advertisement
525A
Getting Started Guide
Standard Equipment
The items listed below are included with your Calibrator. If the Calibrator is damaged or
something is missing, contact the place of purchase immediately. For information on
replacement parts or spares, see the replacement parts list in Chapter 6 of the 525A Users
Manual.
•
•
•
•
Options and Accessories
For more information about these accessories and their prices, contact your Fluke
representative.
•
•
•
•
•
Safety Information
This Calibrator complies with EN 61010, ANSI/ISA-S82.01-1994, CAN/CSA-C22.2 No.
1010.1-92. Use the Calibrator only as specified in this manual, otherwise the protection
provided by the Calibrator may be impaired.
CAT II equipment is designed to protect against transients from energy-consuming
equipment supplied from the fixed installation, such as TVs, PCs, portable tools, and
other household appliances.
A "WWarning" statement identifies hazardous conditions and actions that could cause
bodily harm or death.
A "WCaution" statement identifies conditions and actions that could damage the
Calibrator or the equipment under test.
International symbols used on the Calibrator and in this manual are explained in Table 2.
2
525A Getting Started Guide (this document), Part No. 1601541
525A CD-ROM (contains the 525A Users Manual and 525A Getting Started Guide),
Part No. 1601552
Power Cord (120 V cord, Part No. 1618621 or 240 V cord, Part No. 769422)
Thermocouple Shorting Jumper, Part No. 610747
5520A – 525A Leads kit
Y525 Rack Mount kit
Fluke 700 and 6100 series pressure modules
MET/CAL with 525A Function Select Code (FSC)
MET/CAL 525A calibration procedure
Advertisement
Table of Contents
