Table of Contents
Advertisement
CLASSIFICATION
Einstufung
SUBJECT
Thema
CUSTOMER'S CODE
EvalPAN4570
For more information on the items above see the website of Ember
(www.ember.com)
package as part of the Ember
9.4. TESTING FOR IEEE802.15.4 PARAMETERS
The software on PAN4570 as delivered is the >Ember
(Version 1. Oct. 2006) utility. It allows the basic RF transceiver testing including range
testing.
The basic operation of Ember
>return< on the terminal will display a complete list of commands, below the mostly used
commands are explained.
e
channel x
txtone
txstream
transmit x
receive
txpow
Txpowermode 1 0
All available commands are shown after typing HELP >return<., or as document on the
CD.
European Technology Center
Panasonic Electronic Devices (EUROPE) GmbH
EvalBoard PAN4570
PANASONIC'S CODE
and the documentation included in the Ember
TM
development kits.
TM
Range Test Application is as follows. Typing HELP and
exit, leaving the last funktion
channel entry, where
x=b sets the lowest channel at 2405MHz
x=12 sets a channel at 2440MHz
x=1a sets the highest channel at 2480MHz
turns on an unmodulated carrier
turns on a continuously modulated carrier
transmission of packets according to IEEE802.15.4
reception of packets (requires another device set to transmit on the same
channel)
remark: for resetting the packet error counter to zero the transmitter has to
be restarted
after RESET the maximum default Tx power of +3dBm is set.
with
the BOOST MODE with Tx higher output power and higher
Rx sensitivity is enabled. BOOST MODE is only allowed
for PAN4570 versions with pad or U.FL RF terminal.
Hardware RESET or Txpowermode 0 0 returns the module
to NORMAL MODE
No.
DS-Eval4570-2400
PAGE
Seite
DATE
Datum
TM
Range Test Application 2.0<
APPROVED
CHECKED
genehmigt
geprüft
REV.
C
15 of 20
06.11.2006
TM
Inc.
TM
Insight Desktop
DESIGNED
Erstellt
Advertisement
Table of Contents
