Assign A User Scale To A Programmable Pad - GEM Genesys Pro Release Notes

release notes
Press the EDIT button in the programmable pads
1
section. The edit page is shown on the display.
Select a PAD to assign the USER scale using the
2
UP/DOWN CURSOR. (the pad n.4 is used in this
example)
Once you have selected the PAD, assign the SCALE
3
function by rotating the DIAL
Moving to the next fi eld (USER 1) using the RIGHT CUR-
4
SOR. Here you can select the USER scale memory to
assign to the PAD. (USER scale location from 1 to 8)
Now it is possible to select another pad to assign a
different USER scale or the SCALE OFF function, to
restore the normal temperament during your per-
formance
The programmable pad set up can be stored in one of the internal MEMORIES or stored in realtime by using
the LOCK function [F8]. Please refer to the relative section in the owner manual.
assign a user scale to a pad

ASSIGN A USER SCALE TO A PROGRAMMABLE PAD

select the PAD n. 3 with the CURSOR, assign the
5
SCALE OFF function by rotating the DIAL
By pressing PAD n. 4 you can now recall in realtime the
temperament you have programmed in the USER scale 1.
Pressing the PAD n. 3 (SCALE OFF), you restore the normal
temperament (EQUAL).
Genesys series
Page5