Checking The Operating System Release; How To Upgrade The Operating System - GEM Genesys Pro Release Notes

It is very important to install on board the latest operating system release of the instrument. For this reason fi rst
of all check the currently installed O.S. Version:
1
Press the button SYSTEM on the control panel
2
The display show the SYSTEM setting main screen
Press F7 function button to select "BATTERY&RELEASE"
3
menu.
WARNING! Before you proceed with the upgrading, please save all personal data stored in the
internal memory of the Genesys .
1
Insert the operating system CD in the CD driver
Switch OFF the Genesys
2
Switch on the instrument, rotating the ALPHA DIAL on
3
the panel at the same time.
The following SYSTEM SET UP screen appears in the
4
display:
5 Select the number 2, using the cursor button DOWN
NOTE: in the Genesys there are two types of operating system upgrades:
1) Complete upgrade which contains new functions and implementations, optimization, debug and musical resource
update (Sounds and styles). This type of upgrade due to its size is normally archived in a CD.
2) Upgrade patch. It consists of debug and optimization of the system without update the musical resource. Normally the
upgrade patch can be downloaded from our website and easily transferred in a fl oppy disk to upgrade the Genesys.

CHECKING THE OPERATING SYSTEM RELEASE

HOW TO UPGRADE THE OPERATING SYSTEM

In the higher part of the display the currently installed
4
O.S. data is reported. Please compare this date with
the one of the O.S. CD included in the Genesys pack-
age. In case the CD has a later date, please upgrade
the instrument. Also check in our websiste: www.
generalmusic.com.
Select the CD Rom as installation driver by turn the
6
alpha dial. Then press the ENTER button.
After the confi rm message, press ENTER again.
7
The upgrade will start. The upgrade will be
completed in a few minutes. Once the operation is
over, the main screen is showed on the display.