Genesys Microtuning Response Programming; Concept - GEM Genesys Pro Release Notes

release notes

GENESYS MICROTUNING RESPONSE PROGRAMMING

In Genesys the global Microtuning response can be set in order to affect ALL the PARTS both played in
realtime and triggered by the styles, or only the solo PARTS played in realtime, without affecting the parts
triggered by the styles. You can select the option you prefer.
1 Press the button SYSTEM on the panel
Select the TUNING&SCALE menu using the
2
CURSOR, then press ENTER
The instrument enter the TUNING&SCALE
menu.
3 Press the function button F2 PART SELECT
The default set up is ALL. This mean that detuning
one note with the AS1, ALL the same notes and ALL
the instruments used in your performance will be
detuned (even those triggered by the accompani-
ment tracks).
microtuning response programming

Concept:

Steps:
Example with PART SELECT=ALL (default)
MIDI In
MIDI Out
Play on the keyboard using the styles and press any
of the ARABIC SCALE detune buttons on the AS1,
for example F#. In this way all the notes=F# will
be detuned, in all octaves and in all the instruments
of the used section (realtime and styles).
4 Select now the UPPER option by rotating the DIAL
Selecting the UPPER mode, only the notes of the
realtime tracks assigned to the UPPER section will
be affected by the AS1 detuning.
Example selecting PART SELECT=UPPER
MIDI In
MIDI Out
Play on the keyboard using the styles and press any
of the ARABIC SCALE detune buttons on the AS1,
for example F#. In this way only the notes=F# of all
the octaves assigned to the UPPER sections (soloist
sounds), will be affected by the detuning.
Genesys series
Page3