Folder “Autoload” Function - GEM Genesys Pro Release Notes

release notes
The great Genesys operating power allows you to customize every section of the instrument, in a very ac-
curate way: preset, memories, samples, user styles etc. Can be quickly created or edited to be used in your
live (or studio) performance set up.
In Genesys the internal software data such as: the operating system, the musical resource, the user data etc. Are
stored in a large backed RAM memory area. The RAM is powered by an apposite internal battery, this battery is con-
tinuously charged during the normal use of the instrument. When the instrument is switched off the backup battery
maintain the internal RAM data for a period up to 6/7 days, after this period all the memory data are missed. Every
time you switch on the Genesys, the instrument check the RAM data contents, if the resource data are not present,
it reload them from the internal hard drive, as the same way as a personal computer. The AUTOLOAD folder data
contents is automatically loaded together with the other data resources.
It is now possible to automatically reload all your custom set up of the instrument, when Genesys
load the operating system and the musical resource from the internal hard drive.
Load fi rst into RAM memory all your custom set up data of the instrument (Preset, Style preset,
1
User style, User sounds etc.).
Press the DISK button on the panel and select RAM. The display shows in the column on the right
2
the folders containing the edited or created data.
3 Press the function button F2 SAVE to save the entire RAM contents.
4 Press ENTER when the confi rm message appears in the display.
Press the function button [G] NEW FOLDER, and give the name "AUTOLOAD" to the new folder
5
6 Once the new folder appears in the display press ENTER, all the data are saved in this folder.
FOLDER "AUTOLOAD" FUNCTION
Concept:
Description:
In this example we have stored in RAM some
song, sounds, preset, user style and system data
(SYSTEM).
Genesys series
Page27