Get Started; Beoplayer Or Beolink Pc 2 (Pc Use Only); Itunes (Macintosh Use Only) - Bang & Olufsen Beosound 2 User Manual

Get started

Once you have connected and installed BeoSound 2 to your computer,
you can begin using it. To find out how BeoSound 2 works with your
computer and music player, simply proceed to the section on the
following pages, describing the setup you have. Available options are
listed below.

BeoPlayer or BeoLink PC 2 (PC use only)

We recommend using BeoSound 2 with Bang & Olufsen's own music players:
BeoPlayer or BeoLink PC 2. This Guide describes the basic use on the
following pages. To learn more about advanced use of BeoSound 2 with
BeoPlayer or BeoLink PC 2, refer to the On-screen Guide located at the
bottom of the on-screen control bar in both of these players. Find out for
example how to:
– Move or rename tracks and playlists in BeoSound 2.
– View and edit track INFO.
– Find out more about CDDB music information.
– Alter Configuration settings for a personalised touch.
– Format a memory card.
All future reference to BeoPlayer includes BeoLink PC 2 use, as these two
players work similarly regarding Beosound 2.

iTunes (Macintosh use only)

To learn more about using iTunes, refer to 'BeoSound 2 with iTunes' in this
Guide. For further information on iTunes, refer to the iTunes help function.
Other players
It is possible to use other players than the above mentioned with BeoSound 2.
Examples can be found in 'other players and options' on the last page of this
Guide.
Open the small compartment on a
back of BeoSound 2 to insert a
memory card.
GO
Use a needle to pull out the key ring
tag. You may, for example, use the
tag to attach a neck strap.
5