Lexus RX350 Quick Manual page 45

Adjusting the set speed
■
To change the set speed, operate the lever until the desired set speed is displayed.
■
Changing the vehicle-to-vehicle distance (vehicle-to-vehicle distance con-
trol mode)
Preceding 
vehicle mark
■ Canceling and resuming the speed control
45
RX350_QG_U_OM48E93U
Increases the speed
1
Decreases the speed
2
Fine adjustment: Momentarily move the
lever in the desired direction.
Large adjustment: Hold the lever up or
down to change the speed, and release
when the desired speed is reached.
Pressing the button changes the vehicle-to-
vehicle distance as follows:
Long
1
Medium
2
Short
3
The vehicle-to-vehicle distance is set
automatically to long mode when the
engine switch is turned to IGNITION
ON mode.
If a vehicle is running ahead of you, the
preceding vehicle mark will also be dis-
played.
Pulling the lever toward you cancels
1
the speed control.
The speed setting is also canceled
when the brake pedal is depressed.
Pushing the lever up resumes the
2
cruise control and returns vehicle
speed to the set speed.
However, cruise control does not
resume when the vehicle speed is
approximately 25 mph (40 km/h) or
less.