Lexus RX350 Quick Manual page 42

■
Adjusting the set speed
■
Changing the vehicle-to-vehicle distance (vehicle-to-vehicle distance con-
trol mode)
Preceding vehicle mark
The vehicle-to-vehicle distance control mode maintains the preset cruising speed as long
as no vehicle is detected ahead.
■ Resuming follow-up cruising when the vehicle has been stopped by system
control (vehicle-to-vehicle distance control mode)
RX350_QG_U_OM48E93U
Increases the speed
1
(Except when the vehicle has been
stopped by system control in vehicle-
to-vehicle distance control mode)
Decreases the speed
2
Fine adjustment: Momentarily move the
lever in the desired direction.
Large adjustment: Hold the lever up or
down to change the speed, and release
when the desired speed is reached.
Pressing the button changes the vehicle-to-
vehicle distance as follows:
Long
1
Medium
2
Short
3
The vehicle-to-vehicle distance is set
automatically to long mode when the
engine switch is turned to IGNITION
ON mode.
If a vehicle is running ahead of you, the
preceding vehicle mark will also be dis-
played.
After the vehicle ahead of you starts off,
push the lever up.
Your vehicle will also resume follow-up
cruising if the accelerator pedal is
depressed after the vehicle ahead of you
starts off.
42