Use Wps For Wireless Connection; Set The Router's Pin; Use The Wps Wizard For Wi-Fi Connections - TP-Link Archer C20 User Manual

Chapter 10

10. 7. Use WPS for Wireless Connection

Wi-Fi Protected Setup (WPS) provides an easier approach to set up a security-protected
Wi-Fi connection.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced >

10. 7. 1. Set the Router's PIN

Router's PIN is enabled by default to allow wireless devices to connect to the router
using the PIN. You can use the default one or generate a new one.
Note:
1. If you want to enable/disable the WPS feature, go to
Enable WPS check box.
2. PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS
supported devices can connect to your router with the PIN. The default PIN is printed on the label of the router.

10. 7. 2. Use the WPS Wizard for Wi-Fi Connections

1. Select a setup method:
• Push Button(Recommended): Click
minutes, press the WPS button on the client device.
PIN: Enter the client's PIN, and click Connect.
•
2. Success will appear on the above screen and the WPS LED on the router will keep on
for five minutes if the client has been successfully added to the network.
Wireless > WPS .
Customize Your Network Settings
System Tools > System Parameters
Connect on the screen. Within two
> WPS, select or clear the
56