Need More Help - Craftsman 917.20403 Operator's Manual

TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center
PROBLEM CAUSE
CORRECTION
Loss of drive 1 Freewheel control in
"DISENGAGED" position.
1 Place freewheel control in
"ENGAGED" position.
2 Debris on steering plate (if 2 See "CLEANING" in the
equipped), maintenance section.
3 Motion drive belt worn, damaged, 3 Replace motion drive belt.
or broken.
4 Air trapped in transmission during 4 Purge transmission.
shipment or servicing.
5 Axle key missing. 5 Install axle key at rear wheel. See
"TO REMOVE WHEEL" in the
Service and Adjustments section.
Engine "backfires"
when turning
engine "OFF"
1 Engine throttle control not set 1 Move throttlecontrol between
between half and full speed (fast) half and full speed (fast) position
position before stopping engine, before stopping engine.
Engine dies when 1 Reverse operation system (ROS) 1
tractor is shifted is not "ON" while mower or other
into reverse attachment is engaged.
Turn ignition key to ROS "ON"
position. See Operation section.
NEED MORE HELP?
You]1, f h_d the answer aRd moreon ma1_agemyhomeocom- forfree[
o Findthis and a[[ yourotherproduct manualsonline.
o Getanswers fromourteam ofhome experts.
Geta personalized maintenance planforyourhome.
Findinformation andtools to helpwithhome projects.
aHage ho e
brought to you by Sears
39