Input Mode - Marantz SR6011 Owner's Manual

Contents Connections
Input Select
Set the audio input mode of each input source.
The input modes available for selection may vary depending on the input
source.
0 "Input Select" settings are stored for each input source.
o Input Mode
Set the audio input modes for the different input sources.
It is normally recommended to set the audio input mode to "Auto".
Auto
(Default):
HDMI:
Digital:
Analog:
7.1CH IN:
0 If "HDMI Control" is set to "On" and a TV compatible with the ARC is
connected via the HDMI MONITOR connectors, the input mode whose input
source is "TV Audio" is fixed to ARC.
0 The sound mode cannot be set if the input mode is set to "7.1CH IN".
Front panel Display
Playback
Automatically detect input signal and
perform playback.
Play only signals from HDMI input.
Play only signals from digital audio input.
Play only signals from analog audio input.
Only signals input from the 7.1CH IN
connector will be played back.
Rear panel
Settings
203
Remote
Tips Appendix
Index