Adjusting The Tone (Tone) - Marantz SR6011 Owner's Manual

Contents Connections

Adjusting the tone (Tone)

Adjusts the tonal quality of the sound.
1
Press OPTION.
The option menu screen is displayed.
2
Use ui to select "Tone", then press ENTER.
The "Tone" screen is displayed.
3
Use o p to set the tone control function to on/off.
On:
Off
(Default):
Front panel Display
Playback
Allow tone adjustment (bass, treble).
Playback without tone adjustment.
Rear panel
Settings
4
Select "On" in step 3 and press i to select the sound
range to be adjusted.
Bass:
Treble:
5
Use o p to adjust the tone, then press ENTER.
-6 dB – +6 dB (Default : 0 dB)
0 "Tone" settings are stored for each input source.
0 This cannot be set when the sound mode is set to "Direct" or "Pure Direct".
0 This item cannot be set when "Dynamic EQ" is set to "On". (v p. 181)
0 You cannot set this when no audio signal is input or in the menu "HDMI Audio Out"
is set to "TV". (v p. 187)
0 This cannot be set when the input mode is set to "7.1CH IN".
134
Remote
Tips Appendix
Adjust bass.
Adjust treble.
Index