Functions And Settings; Using "Whisper-Mode Surround; Using "Game; Muting - Panasonic SC-ZT2 Operating Instructions Manual

Functions and settings

To return to the previous display/
To cancel during setting operation
( ➜ page 21): Press [
20
VQT2R70

Using "WHISPER-MODE SURROUND"

This function is effective during surround playback only. You can enjoy the dynamic effect
even if the sound volume level is low during surround playback.
Press [WHISPER-MODE SURROUND] to select "W.S. ON ".
• The current setting is displayed first.
Each time you press, the setting switches between "W.S. OFF " and "W.S. ON ".
To cancel
Note
WHISPER-MODE SURROUND is not effective in the following cases.
When not using the surround speakers:
When Dolby Virtual Speaker is off.
When using the surround speakers:
When Dolby Pro Logic
If the above setting is made when this function is on, this function temporarily becomes off.

Using "GAME"

Enjoy gaming with more dynamic sound.
Press [GAME].
• "GAME " mode (➜ page 17) in SFC is selected.
To cancel
If canceled, SFC's effect itself is canceled.

Muting

"MUTE " blinks on the display while the volume is muted.
Press [MUTE].
To cancel
Note
• Muting is canceled when you switch the system to Standby.
• Muting is also canceled when you adjust the volume.

Adjusting the bass (woofer part) output

RETURN].
When you feel the bass volume is not balanced with the volume of the front speakers, you
can adjust the bass during playback.
1. Press [CH] to select "WFR ".
(The speaker is switched each time you press the button.)
WFR (woofer) → RS (surround right) (when used) → LS (surround left) (when used)
2. Press [SPEAKER LEVEL +, –] to adjust the bass volume.
Adjustment range: MIN, 1 to 15, MAX

Adjusting the surround speaker output

When using the surround speakers, you can adjust them, too.
1. Press [CH] to select "RS " or "LS ".
(The speaker is switched each time you press the button.)
WFR (woofer) → RS (surround right) (when used) → LS (surround left) (when used)
2. Press [SPEAKER LEVEL +, –] to adjust the volume of each
speaker.
Adjustment range: –10 to +10
Repeat steps 1 and 2 to adjust the level of each speaker.
Note
• You cannot adjust the front speakers with this operation. To adjust the volume balance of left
and right front speakers, see "Adjusting the volume balance of front speakers". ( ➜ page 21)
• If the sound is distorted, lower the level.
• You cannot adjust the output level of speakers if the sound field effect is off and the
speaker's audio output is set to off. ( ➜ page 17)
• You can adjust the speaker's output level in each SFC mode respectively. ( ➜ page 17)
• When a commercially available active subwoofer is connected to the subwoofer output
terminal on this unit's rear panel, the subwoofer is synchronized with the unit and the
sound volume is adjusted.
Press [WHISPER-MODE SURROUND] to select "W.S. OFF ".
and SFC are off with 2-channel signal input.
Press again.
Press again.