Enjoying Movies And Music - Panasonic SC-ZT2 Operating Instructions Manual

Enjoying movies and music

• Turn on the TV and switch its input to match the connection (HDMI, for example) using the TV remote control.
Preparations
• Make sure that the speakers are on. (The following are operations when the power is on in Wireless Link Standby.)
Aim the remote control toward the
signal sensor ( ➜ page 7) on the
main unit of this system.
Note
• See page 27 for digital signals that can be played on this system.
• Depending on the playback signal, you may feel the volume of the bass or surround speakers is not balanced with
the volume of the front speakers. In this case, you can adjust the speaker volume during playback. (➜ page 20)
• Even if you switch input to "TV ", images (or audio) of the equipment connected to the BD/DVD IN terminal or AUX1
terminal are output from the TV OUT terminal. When the equipment is connected to both the BD/DVD IN terminal and
AUX1 terminal, signals of equipment whose input is lastly selected are output.
• When using a DVD recorder with built-in VCR (with the DVD output terminal and DVD/VHS output terminal
mounted), select the input as follows in step 2 above.
To enjoy DVD (when connected to AUX2): select "AUX 2 ".
16
To enjoy video (when connected to AUX3): select "AUX 3 ".
VQT2R70
1
Press this button to turn on the system.
2
To select the source press one of these
buttons.
or
TV
BD/DVD
AUX 1
AUX 2
or
AUX 3
3
Start play on the connected equipment.
You can enjoy a variety of surround effects. ( ➜ page 17)
4
To adjust the volume press these
buttons.
Adjustment range: 0 (Min) to 50 (Max)
After playback, reduce the volume level and turn off.
Operation on the main unit
: TV (optical,analog)
: Blu-ray Disc player/DVD recorder (HDMI)
: AUX1 terminal (HDMI)
: AUX2 terminal (optical)
: AUX3 terminal (analog)
"AUX 1", "AUX 2", and "AUX 3" switch every time you
press [AUX].
1
Turn on the system.
Press
2
Select the source.
Press
(The input source switches each time you
press the button.)
TV
BD/DVD
AUX 1
AUX 2
AUX 3
3
Start play on the connected
equipment.
4
To adjust the volume.
Turn
INPUT SELECTOR
: TV (optical, analog)
: Blu-ray Disc player/DVD recorder (HDMI)
: AUX1 terminal (HDMI)
: AUX2 terminal (optical)
: AUX3 terminal (analog)