[PT465] Assembling the front speakers
≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥ For assembly, use a Phillips-head screwdriver.
≥ For optional wall mount, refer to page 8.
Make sure you have all the indicated components before starting assembly, setup, and connection.
2 Front speakers
(with cover plate)
∫ Preventing the speakers from falling
≥ You will need to obtain the appropriate screw eyes to match the
walls or pillars to which they are going to be fastened.
≥ Consult a qualified housing contractor concerning the
appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support. Improper
attachment may result in damage to the wall or speakers.
Remove using a flat
≥ Keep for wall-mount
use (➜ 8).
Slide into the groove.
Insert the wire fully.
Press into the groove.
String (not included)
Thread from the wall to the speaker and tie tightly.
Rear of the speaker