Assembling The Front Speakers - Panasonic SC-HT855 Operating Instructions Manual

HT855En.book Page 4 Tuesday, March 7, 2006 2:33 PM
1

Assembling the front speakers

STEP
Preparation
≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥ For assembly, use a Phillips-head screwdriver.
≥ Make sure you have all the indicated components before starting assembly, setup, and connection.
≥ There is no difference between the right and left speakers and stands.
≥ For optional wall mount, refer to page 6.
2 Front speakers
(with cover plate)
1
Attach the stand to the base.
1 Thread the speaker cable through the base.
For quicker threading, loosely fold the cable in half (do not
crease), pass the folded portion through the hole, and then pull
the rest of the cable through the base.
Cable
2 Attach the stand to the base while gently pulling on the
end of the speaker cable.
4
2 Stands
(with cable)
Base
Stand
Base
Cable
Pull gently.
The supplied stands are specially
designed for attachment to
Panasonic SB-FS540 front speakers.
Use only as indicated in this setup.
2 Bases
2
Secure the stand to the base.
Screw
Tighten securely.
Stand
Base
Screws
Tighten securely.
3
Attach the speaker to the stand.
1 Pull out the end of the speaker cable and position it
between the ridges.
Ridges
Stand
2 Attach the speaker to the stand.
Speaker
Stand
8 Screws
Slide the speaker
cable into the groove.
Cable
Cover plate
Remove before attaching the
speaker and keep for wall-mount
use (➜ page 6).