Table of Contents
Advertisement
| OMNIA VOCO® 8 - QUICK START SETUP GUIDE
10
If for some reason the VOCO 8 does not appear after scanning the network (due to firewall
configuration, or for some other reason) you may need to add it manually. Click on "New" in the main
Remote Gateway window.
Enter something useful in the "Connection Name" , "Radio Name" and "City" fields. Enter the VOCO 8
"Control IP" address in the "Num / IP" field. Finally, enter the user name and password for the account
this connection should use. Create one connection entry for each of the three default user names
(described below).
User Names and Access Levels
Important:
There are three default user accounts on the VOCO 8—Each has a VERY different purpose.
If you use the wrong one you will likely not find the controls you are looking for.
Admin
Used for managing user and studio rights, as well as certain global configuration settings. The default
password for the admin account is admin.
Advertisement
Table of Contents
