Mounting The Server Using The Rack Mount Kit; Setting Up Power - Dell poweredge r720 Installation, Maintenance And Troubleshooting Manual

Device name
Nominal Power
Consumption
Heat Output
Operating
Temperature
Humidity
R720 System
Dimensions
Weight
VA Rating
Nominal Power
Consumption
Heat Output
Operating
Temperature
Humidity

Mounting the Server Using the Rack Mount Kit

For more information about mounting the Dell R720 server using sliding rails, see
ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/
poweredge-r710_Setup%20Guide4_en-us.pdf.
For more information about mounting the Dell R620 server using the Rack Mount Kit, see
support.dell.com/support/edocs/systems/peR620/en/placemat/rack/r620pmrack.pdf.

Setting up power

To set up the AC power:
Avaya CMS Dell R720 and R620 Computer Hardware Installation
Description
6.5 A - 3 A (X 2) (with 495 W AC power supply unit)
1908 BTU/hr maximum (495 W power supply)
Continuous operation: 10 °C to 35 °C. De-rate maximum allowable
dry bulb temperature at 1 °C/300 m above 900 m (1°F /550 ft)
10% to 80% relative humidity (RH), with 26 °C maximum dew point
Height 87.3 mm
●
Width 482.4 mm with rack latches and 444 mm without rack
●
latches
Depth 723 mm
●
29.5kg (64.9lbs)
10.0 A X 110 VAC = 1100 VA
10.0A - 5 A (X 2) (with 750 W AC power supply unit)
2891 BTU/hr maximum (750 W power supply)
Continuous operation: 10 °C to 35 °C. De-rate maximum allowable
dry bulb temperature at 1 °C/300 m above 900 m (1°F /550 ft)
10% to 80% relative humidity (RH), with 26 °C maximum dew point
Mounting the Server Using the Rack Mount Kit
ftp://
http://
27
October 2015