Disassembly; Removing And Replacing The Battery Cover And Battery - Motorola MOTOROKR E8 Service Manual

Disassembly

Disassembly
G
G

Removing and Replacing the Battery Cover and Battery

E
18
The procedures in this section provide instructions for the disassembly of E8
telephones. Tools and equipment used for the phone are listed in Table 1, preceding.
Many of the integrated devices used in this equipment are vulnerable to damage
from electrostatic discharge (ESD). Ensure adequate static protection is in place
when handling, shipping, and servicing the internal components of this equipment.
Avoid stressing the plastic in any way to avoid damage to either the plastic or
internal components.
T5 screws are silver. T3 screws are black. See Figure 6 for screw locations.
All batteries can cause property damage and/or bodily injury, such as burns if a
conductive material, such as jewelry, keys, or beaded chains touch exposed termi-
nals. The conductive material may complete an electrical circuit (short circuit) and
become quite hot. Exercise care in handling any charged battery, particularly when
placing it inside a pocket, purse, or other container with metal objects.
1. Ensure the phone is turned off.
2. Slide the battery cover up (toward the top of the phone) to release (see Figure 1).
Figure 1. Removing the Battery Cover
3. Lift up and remove the battery cover.
October 23, 2007
MOTOROKR E8
v510546
6809517A42-O