System Connections; Basic System Connection - Panasonic WJ-FS316 Operating Instructions Manual

SYSTEM CONNECTIONS

Basic System Connection

The Video Multiplexers WJ-FS309, WJ-FS316, WJ-FS409 and WJ-FS416 are connected with cameras, video monitors and a
Time Lapse VCR. A typical connection example is shown below. The ALARM/REMOTE connector is described later.
Cameras
VIDEO OUTPUT
9
IN
OUT
9
• The figure shows the WJ-FS309/FS409. The WJ-FS316/FS416 has 16 VIDEO IN and OUT connectors each.
• Refer to the operating instructions of each system component for connection and operation.
• The WJ-FS309 and WJ-FS316 are designed for black and white pictures only. If color cameras are connected to the unit,
pictures are displayed in black and white.
With certain monitor types, color noise may appear in the picture.
• In case of connecting multiple devices compatible with the Panasonic Security Data mode, connect the unit in a daisy-
chain configuration. The allowable connecting devices are up to 16 in a system. The maximum allowable cable length of
the system is approximately 500 m (1 650 ft).
23
8 7 6 5 4 3 2
8 7 6 5 4 3 2
VIDEO
Video Multiplexer (WJ-FS309/FS409)
1
1
Video Monitor Video Monitor
VIDEO INPUT
SIGNAL
GND
CAMERA
ALARM/REMOTE
DATA
SW IN
MULTI
SCREEN OUT
PLAY IN REC OUT SPOT OUT
System Controller
Time Lapse VCR or
Digital Disk Recorder
(Example: WJ-HD100)