Speaker Settings - Panasonic SC-BTX70 Operating Instructions Manual

Blu-ray disc home theater sound system
Hide thumbs Also See for SC-BTX70:
Table of Contents

Advertisement

Speaker settings

(When the optional surround, surround back speakers are connected.)
The surround and surround back speakers will only be displayed when the speakers are connected with the optional Panasonic
wireless system SH-FX70 and the main unit's settings have been reconfigured in the EASY SETUP. (
Adjusting the sound lag between speakers
ms
Delay time (
)
0.0
For optimum listening with 4.1/6.1-channel sound, all the
speakers, except for the subwoofer, should be the same
distance from the seating position.
If you have to place the surround, surround back speakers
closer to the seating position, adjust the delay time to make up
for the difference.
If the distance B is less than A (
in the relevant table and change to the recommended setting.
1 Press [3, 4, 2, 1] to select the distance box (
[OK].
2 Press [3, 4] to select the setting and press [OK].
e.g., 4.1ch speaker connection
Approximate room dimensions
L
R
A
SW
B
A
LS
RS
LS
RS
Circle of constant primary listening distance
e.g., 6.1ch speaker connection
Approximate room dimensions
L
R
SW
A
LS
RS
LS
RS
B
B
A
LB
RB
LB
RB
Circle of constant primary listening distance
Adjusting speaker level
Volume (Channel balance) (
(Effective when playing multi-channel audio)
1 Select "Test" and press [OK].
A test signal is output.
Front (L)
Front (R)
—————)
:
Surround (LS)
(—
Surround back (LB)
2 While listening to the test signal, press [3, 4] to adjust the
volume of each speaker.
The volume can be adjusted between r6 dB to s6 dB.
≥Set each speaker level according to the volume of the
Front (L) and Front (R) speaker volume respectively.
3 Press [OK].
The test signal stops.
≥No signal is output for the subwoofer. To adjust its volume,
see page 18, Adjusting speaker level during play.
To finish the speaker setting
Press [3, 4, 2, 1] to select "Complete" and press [OK].
≥The test signal is only output from the speakers that were acknowledged during the EASY SETUP.
NOTE
below), find the difference
ms
) and press
0.0
: Actual speaker position
: Ideal speaker position
: Primary listening distance
B
: Actual speaker position
: Ideal speaker position
: Primary listening distance
B
dB
)
0
Surround (RS)
—————)
;
(—
Surround back (RB)
B Surround / Surround back speakers
Difference
Approx. 170 cm
Approx. 340 cm
Approx. 510 cm
L
Complete
Test
dB
LS
0
dB
LB
0
[LS (L)] Surround [RS (R)]
L
Complete
Test
Test
Surround
[LS (L)]
dB
LS
0
dB
dB
LB
0
[LB (L)] Surround back
12)
Setting
5.0 ms
10.0 ms
15.0 ms
R
dB
SW
0
ms
dB
RS
0.0
0
ms
dB
RB
0.0
0
[LB (L)] Surround back [RB (R)]
R
dB
SW
0
Surround
[RS (R)]
ms
dB
RS
0.0
0
ms
dB
RB
0.0
0
Surround back [RB (R)]
RQT9464
39

Advertisement

Table of Contents
loading

Table of Contents