Speaker Settings - Panasonic SC-BT207 Operating Instructions Manual

Changing the unit's settings

Speaker settings

Adjusting the sound lag between speakers
ms
Delay time ( )
0.0
For optimum listening with 5.1-channel sound, all the speakers, except
for the subwoofer, should be the same distance from the seating
position.
If you have to place the center, surround speakers closer to the
seating position, adjust the delay time to make up for the difference.
If either distance A or B is less than C (
in the relevant table and change to the recommended setting.
1 Press [3, 4, 2, 1] to select the distance box (
[OK].
2 Press [3, 4] to select the setting and press [OK].
Approximate room dimensions
C
L C R
A
C
SW
B
LS RS
LS RS
Circle of constant primary listening distance
A Center speaker
Difference
Approx. 34 cm
Approx. 68 cm
Approx. 102 cm
Approx. 136 cm
Approx. 170 cm
B Surround
Difference
Approx. 170 cm
Approx. 340 cm
Approx. 510 cm
Adjusting speaker level
Volume (Channel balance) (
(Effective when playing multi-channel audio)
1 Select "Test" and press [OK].
A test signal is output.
Front (L)_—)Center (C)_—)Front (R)
:
Surround (LS)(—___ Surround (RS)
2 While listening to the test signal, press [3, 4] to adjust the volume
of each speaker.
The volume can be adjusted between r6 dB to s6 dB.
≥Set each speaker level according to the volume of the Front (L)
and Front (R) speaker volume respectively.
3 Press [OK].
The test signal stops.
≥No signal is output for the subwoofer. To adjust its volume, see
page 18, Adjusting speaker level during play.
To finish the speaker setting
Press [3, 4, 2, 1] to select "Complete" and press [OK].
RQT9483
42
below), find the difference
ms
) and press
0.0
: Actual speaker position
: Ideal speaker position
: Primary listening distance
A B C
Setting
1.0 ms
2.0 ms
3.0 ms
4.0 ms
5.0 ms
Setting
5.0 ms
10.0 ms
15.0 ms
dB
)
0
;
Center (C)
ms
L
0.0
Complete
Test
dB
LS
0
[LS (L)] Surround [RS (R)]
Center (C)
ms
L C
0.0
Complete
Test
Test
Surround
[LS (L)]
dB ms
LS
0 0.0
dB
R
C
0
dB
SW
0
ms dB
RS
0.0 0
dB
R
0
dB
SW
0
Surround
[RS (R)]
dB
RS
0