Table of Contents
Advertisement
Changing the unit's settings
To select these settings, perform steps 1 – 5 (
"Sound"
Dynamic Range Compression
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
Change the dynamic range (
Digital Audio Output
≥Press [OK] to show the following settings.
Dolby D/Dolby D +/
Dolby TrueHD
DTS/DTS-HD
MPEG Audio
BD-Video Secondary Audio
Turn on/off the clicking sound on the menu and audio with
secondary video in picture-in-picture mode. (
PCM Down Conversion
Select how to output audio with a sampling frequency of
96 kHz or more.
≥Signals are converted to 48 kHz despite the settings across
in the following cases:
– when the signals have a sampling frequency of over 192 kHz
– when the disc has copy protection
– when "BD-Video Secondary Audio" is set to "On"
Downmix
Switch the downmix system for playing back multi-channel
surround sound.
≥When "Dolby D/Dolby D +/Dolby TrueHD" or "DTS/DTS-HD"
is set to "Bitstream", there are no downmix effects for the
outputted audio.
≥The audio will be outputted in "Stereo" in the following cases.
– AVCHD playback
– Playback of clicking sound on the menu and audio with
secondary video in picture-in-picture mode
High Clarity Sound
When the analog video terminal is not being used, the
electrical current that flows through the analogue video circuit
can be stopped. This prevents adverse effects on the audio
signals and produces clearer sound.
≥This works only when "BD/DVD", "SD" or "USB"is selected
as the source.
≥Set to "Enable" and then set "High Clarity Sound" on the
on-screen menu to "On". (
≥Use this when outputting image via HDMI AV OUT terminal.
Analogue image will not be output via the VIDEO OUT terminal.
Speaker
"Display"
On-Screen Messages
Choose whether to show status messages automatically.
On-Screen Language
Choose the language for these menus and on-screen messages.
Screen Saver Function
This is to prevent burn-in on the screen.
≥When this is set to "On", the masked-off area on the screen
becomes grey.
[Only when connecting with an HDMI cable and "HDMI Video
Format" (
37) is set to any other mode than "576p/480p"]
FL Display
Changes the brightness of the unit's display.
RQT9464
Software Licence
36
35)
[BD-V] [AVCHD] [DVD-V] [DivX]
52) for late night viewing.
Select whether Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS
Digital Surround, DTS-HD High
Resolution Audio or DTS-HD
Master Audio is output in
"Bitstream" or "PCM" format.
≥Not making the proper settings
may result in noise.
≥If the unit is connected with the
HDMI AV OUT terminal, the
specifications of the connected
equipment take preference over
this unit and audio selected in
these items may not be output
(e.g., when a television is
connected, the HDMI audio
output of this unit is limited to
down-mixed 2ch.)
[BD-V]
19)
34)
≥On
≥Off
Effective only when Dolby TrueHD is played.
≥Auto:
≥Bitstream:
Select "Bitstream" when the connected equipment can decode the
respective audio format.
– Connect equipment supporting HDMI (High Bit rate Audio) and
use a High Speed HDMI Cable in order to output high bit rate
audio such as Dolby Digital Plus, Dolby TrueHD, DTS-HD High
Resolution Audio or DTS-HD Master Audio.
≥PCM:
Select "PCM" when the connected equipment cannot decode the
respective audio format.
Refer to the operating instructions for connected devices to verify
whether or not they can decode each of the audio formats.
When connected to equipment with a built-in MPEG
≥Bitstream:
decoder.
≥PCM:
When connected to equipment without a built-in MPEG
decoder.
The primary audio and secondary audio are mixed and
≥On:
output. The sampling frequency is converted to 48 kHz.
The clicking sound on the menu and secondary audio
≥Off:
are not output.
≥On:
Signals are converted to 48 kHz. (Choose when the
connected equipment cannot process signals with
sampling frequency of 96 kHz.)
Signals are output as 96 kHz. (Choose when the
≥Off:
connected equipment can process signals with
sampling frequency of 96 kHz.)
When connected to equipment that does not support
≥Stereo:
the virtual surround function.
≥Surround encoded:
When connected to equipment that supports the
conversion from 2 channels to multi channel surround.
≥Enable
≥Disable
Refer to page 39
≥Automatic
≥Off
≥English
≥Français
≥Español
≥Deutsch
≥Italiano
≥Nederlands ≥РУССКИЙ
≥On:
If there is no operation for 5 minutes or more, the displayed screen
switches to the other states automatically.
– When the Direct Navigator or START menu is displayed, the
display returns to the screen saver mode.
– When CD or MP3 is played, the display returns to the screen saver
mode. (Playback continues.)
– When still pictures are shown (except for slideshow), the display
returns to the Direct Navigator screen.
≥Off
≥Bright
The display is dimmed.
≥Dim:
≥Automatic: The display is dimmed, but brightens when you perform
some operations.
Information about the software used by this unit is displayed.
Advertisement
Table of Contents
