Audible Message Alert - BT response 75 User Manual

Audible message alert

Press and hold
between on and off.
You can stop your BT Response 75
from beeping to indicate new memos
and messages have been left.
Press and hold
Your BT Response 75 announces
"Message Alert off".
To switch message alert on press and
hold the Skip button again.
Your BT Response 75 announces
"Message Alert On".
To record a memo
You can use your BT Response
75 to record a memo which
can be played back by another
user.
A memo can be of any length,
up to the maximum recording
time available (36 minutes).
Play
memo Press and hold the Play/memo
button.
Your BT Response 75 will beep
and the display flashes 'r'.
Keep holding the Play/memo
button and record your memo
clearly, about 15-30 cms from
the microphone.
To end the recording release
the Play/memo button.
Your BT Response 75 stores
memos and treats them in the
same way as incoming messages.
14
BT Response 75 – Issue 2 – Edition 1 – 7/10/03
Skip to toggle
Skip button.
Please note
To play back, delete or skip forward or
backward through memos, follow the
instructions for playing back messages
(see below).
To playback messages and
memos
Press the Play/memo button.
Play
Your BT Response 75 will
memo
announce "You have X
messages".
Messages and memos are
announced and played back in
the order they were received.
During message playback the
message indicator shows the
number of the message being
played. 9 flashes if the
message is number 10 or more.
Skip
Press the Skip
skip forward to the beginning
of the next message.
Skip
Press the
to return to the start of the
current message or twice to go
back to the previous message.
Pause
Press the Pause button to
pause playback. The display
will flash P. Press it again to
resume playback.
When all your messages have
been played, your BT Response
75 announces "End of messages"
and the message indicator
counts down from 8 to 0.
button to
Skip button once