At a glance – + Volume Stop Adjusts the Stops message volume of playback, message recording of playback. memos and your outgoing message. Delete Lets you delete individual Use to record messages or and check all messages. your personal outgoing –...
Key features Time Saver 11 minutes recording capacity Offers the benefits of digital recording. This means that your Response 12 will answer after 2 rings if messages have been left. If there are no messages it Message Indicator will answer after 6 rings. During...
In this guide At a glance Key features Introduction Setting up Safety instructions Using your Response 12 Remote access Help Maintenance Technical information Wall Mounting Template Index...
Introduction Your Response 12 has been designed for ease of use and made to the high standards set by BT. You can expect your Response 12 to give For your records you many years of trouble-free service. Please read the instructions carefully...
Setting up Follow these steps to set up your Response 12 ready for use. Plan the location of your Plug the mains power cord into the back of the machine Response 12 Situate your Response 12 close enough To prevent the mains cable being pulled...
Page 7
You will now be able to use your telephone as normal. Your Response 12 is now ready to use. Wall mounting your Response 12 Use the template on page 16 to drill holes in the wall. Leave a small gap between the screw heads and the wall.
• Do not place your Response 12 on untreated antique furniture. • Do not use your Response 12 in damp, humid conditions such as bathrooms. • Do not expose the equipment to fire or water.
Using your Response 12 Answering machine controls Outgoing message The outgoing message is the message a caller hears when your Response 12 To switch on your Response 12 from To switch the answering machine answers a call. ON and OFF...
Your Response 12 answers the call after 6 A memo can be any length up rings if you have no messages. After your to the maximum recording first message is recorded your Response time available.
PLAY Call screening once to skip forward to the next message. You can let your Response 12 answer an incoming call and hear the caller’s voice To switch on your Response 12 from through the loudspeaker so you can To delete messages...
To help keep your messages private, you require. your Response 12 requires you to enter a 3-digit Security Code before you can To switch on your Response 12 from play back your messages.
Page 13
To switch your answering machine off. To exit remote access. To change the Security Code. Once you are in remote access mode and have heard the beep press . A confirmation beep will sound. Enter your new 3 digit code, you will hear 2 beeps as confirmation of the change.
Help If you have any problems using your Response 12, this section gives you the most common solutions. LED does not light up. Check that your Response 12 is correctly connected to the mains and that the power cable is inserted into the socket on the back of the machine.
Maintenance If you have to return your General Response 12 Simply clean your Response 12 with a Pack the unit securely, preferably in the soft cloth. Do not clean with a wet cloth. original packaging. All parts must be Do not clean with abrasive materials or returned including the mains power solvents as these may damage the unit.
Page 19
Registered Office: 81 Newgate Street, London EC1A 7AJ. Registered in England No. 1800000. conditions set out in them Produced by: Designed by: The Art & Design Partnership Limited. Printed in China. Response 12. Issue 1 (12/99) 1 610236 Printed on paper which meets international environmental standards.