Bosch TCA 6301 UC Use And Care Manual page 29

ADD
WATER
TURN ON
WATER
UNIT DE-
SCALING
TURN ON
COFFEE
UNIT DE-
SCALING
EMPTY CLEAN
TRAYS CONTACTS
UNIT IS
RINSING
COFFEE
Draining hot water
SYSTEM
TOO HOT
Downloaded from CoffeeMachineManual.com Manuals
q Rinse out the water tank 21, fill with fresh water up
to max and re insert.
q Empty the receptacle and place back under the
nozzle 13.
q Set function selector 2 to 0.
Note: The appliance is automatically rinsed. Water
flows at intervals into the receptacle. Wait for the next
display on display 3 (approx. 4 minutes).
q Set function selector 2 to
Note: The appliance is automatically rinsed. Water
flows at intervals into the tray 24. Wait for the next
display on display 3 (approx. 4 minutes).
q Empty tray 24 and coffee dregs tray 23.
q Clean and dry contacts 26.
q Re insert tray 24 and coffee dregs tray 23.
q Wipe splashes off the nozzle 13 and appliance.
Note: The appliance is automatically rinsed.
The descaling process is complete. The illuminated
ring on 4 descaling 9 goes out. The appliance is
ready for use again.
The descaling program requires a specific water
temperature before it can start. If the water
temperature is too high, drain hot water first!
q Place a suitable receptacle under the nozzle 13.
q Set function selector 2 to 0.
Water runs into the receptacle.
q Set function selector 2 to
The required temperature has been reached. The
descaling process can start.
z
.
z
.
29