Bosch TCA 6301 UC Use And Care Manual page 11

UNIT IS
HEATING
UNIT IS
RINSING
Downloaded from CoffeeMachineManual.com Manuals
Display 3
Display 3 indicates the settings, the processes which
are running and any messages issued by the
appliance.
The appliance has been programmed ex works with
standard settings for optimum operation. These
settings can be changed
settings / programming".
Button d 4
The appliance is switched on or set to standby mode
with button d 4.
When button d 4 is pressed, the appliance heats up
and is then rinsed. The illuminated ring on button d 4
flashes during this process.
The appliance is not rinsed if:
- the appliance was still warm when switched on or
- coffee was not discharged before the appliance
was switched to standby" mode.
Heating and washing processes are displayed.
While coffee is being brewing, button d 4 is assigned
a stop function. The process is terminated by
pressing button d 4.
i 4 hours after the last coffee was brewed, a rinsing
process is automatically actuated and the
appliance switches to standby" mode. These
settings can be changed
settings / programming".
cafe button 5
Espresso or coffee can be brewed by pressing the
2button 5. The green illuminated ring flashes
while espresso or coffee is being brewed.
If the 2 button 5 is pressed again, the coffee
brewing process is terminated.
see chapter Changing
see chapter Changing
11