Osd Attention Signals - Philips 140S LCD Service Manual

The monitor will detect various display situation automatically. When the
monitor detects the problems, the screen will show the different warning
signals to remind you what is happen to your monitor.
NO VIDEO INPUT
This screen appears if there is no video signal input. Please check that
the signal cable is properly connected to the video card of PC.
minutes the attention signal of Entering Sleep Mode will replace it
automatically.
CANNOT DISPLAY THIS VIDEO MODE
This screen warns when the input frequency from the computer is not a
standard video mode or out of the monitor's scanning range. Please
change the display mode of the operating software in the computer (i.e.
Windows) to 1024 x768 @ 60Hz for best display performance.
ENTERING SLEEP MODE
This screen appears when the monitor is about to enter the sleep mode.
Please press any key on the keyboard or click the mouse to wake up
the monitor and computer.
WAIT FOR AUTOMATIC ADJUSTMENT
This screen appears when you touch the
when the monitor is properly adjusted.
Access Service Mode
Operating monitor with no signals (power saving mode), keep
pressing button for more than 10 seconds. Following information
will appear on the screen. Leave service mode by either re-feed
video signal or simply turn off and on the power of monitor.
SERVICE MODE
SERIAL NO.: TY 123456
HOURS OF OPERATION: 000103
Back

OSD Attention Signals

After 30
1024 x 768
button. It will disappear
To Lock/Unlock OSD function
The OSD function can be locked by pressing
10 seconds, the screen shows following windows for 3 seconds.
Everytime when you press
on the screen automatically. The
(mute) hotkey are still functional for brightness and mute expectively
Locked OSD function can be released by pressing
more than 10 seconds. While press
purpose, the screen will keep showing "OSD MAIN MENU LOCKED "
until OSD function unlocked and screen automatically shows
following window for 3 seconds.
Switch ON/OFF attention signals
All attention signals can be switched off by keep pressing
for more than 10 seconds if there is no video signal supplied.
Recover attention signals by pressing
seconds without video signal input.
140S LCD
Go to cover page
button for more than
or button, this message appears
& (brightness) , &
button for
button for OSD unlocked
button
button for more than 10
Forward
7