How To Access Service Mode - Samsung SP42L6HN Service Manual

Alignment & Adjustment

3-2 How to Access Service Mode

1. Turn off the power to put the unit into the STAND-BY mode.
2. In order to enter the Service Mode, Press "Mute" → "1" → "8" → "2" → "POWER" button on the Remote Control.
In case entry into SERVICE MODE is unsuccessful, repeat the procedures above.
3. Initial DISPLAY State in times of Service Mode Switch overs
DDP1011(L6)
DNIe
ADV7401(M)
ADV7401(S)
uPD64083
MSP4440
CCA(ON)
Cinema CCA
SP Actuator
ESP
CHECKSUM 0000
OPTION
SERVICE
T_HUR3AUS0_XXXX
200X_XX_XX
T-HURUCOM5-XXXX
T-HUR3AUS1_XXXX
4. Buttons operations within Service Mode
MENU
Direction keys ▲ / ▼
Direction keys ◀ / ▶
Source
3-2
Full Menu Display / Move to Parent Menu
Item Selection by Moving the Cursor
Data Increase/Decrease for the Selected Item
Cycles through the active input source that are connected to the unit
Samsung Electronics