Factory Data - Samsung SP42L6HN Service Manual

3-3 Factory Data

1. DDP1011
No Item
1 V-Position
2 H-Position
3 LAMP SYNC
4 INDEX DELAY
5 SEQ SELECT
6 V-FLIP
7 H-FLIP
8 GAMMA
9 SLR
10 DMD_BIAS
11 Lamp Boost
12 Lamp Sync Delay
13 Engine Select
14 Lamp Watt
15 Lamp Select
16 Test Pattern
Samsung Electronics
★ The underlined are items applied during the service adjustment. None of the others should be adjusted.
Range Default
0-60 36
0~120 60
Pulse(P)
0~359 40
0~15 5
Normal/Flip Normal
Normal/Flip Normal
0 ~ 15 2
OFF/ON OFF
B,C,D,E E
0~63 20
0~4095 0
SAMSUNG
120W
Philips
0
Remark
Screen upper and lower adjustment
Screen left and right adjustments
Pulse(P), Pass(T)
Synchronizes the base position of the color wheel with the
corresponding color signal.
This is critical to the natural color display. If the index delay
is not properly set, even the correct CCA cordinates will not
help when displaying natural colors.
Sequence Selection
Vertica Flip Operation
Horizontal Flip Operation
Gamma Table Selection
SLR Funcion On/Off
DMD Bias pin voltage selection
Lamp Boost value selection
Lamp Sync delay value selection
SAMSUNG and ZEISS Selection
120W/132W Selection
Philips/Osram/Ushio
This displays the built-in pattern of the DDP1011 chip.
DDP1011 drives the DMD panel, so displaying this pattern
means there is no error in the DDP1011 projection function
and the panel itself.
Alignment & Adjustment
3-3