Connecting The Power Cord; Connecting An Ac Power Cord - H3C s5800 series Quick Start Manual

To remove an LSVM1AC650 power module:
1. Hold the handle on the power module with one hand, pivot the latch on
the power module to the right with your thumb, and pull the power
module part way out of the slot.
2. Supporting the power module bottom with one hand, slowly pull the
power module out with the other hand.
Figure 31 Removing an LSVM1AC650 power module

Connecting the power cord

CAUTION:
Connect the power cord after you install the power module in the switch.
•
Make sure the power module switch is turned off when you connect the
•
power cord.
Connect the power cord to the switch before you connect it to the power
•
source.

Connecting an AC power cord

To connect an AC power cord:
1. Install a bail latch on the power module, as shown in
21
Figure 32