Installing An S5800-54S Switch In A 19-Inch Rack - H3C s5800 series Quick Start Manual

Figure 7 Mounting positions on an S5800-54S switch
(1) Front mounting position
(2) Rear mounting position
Installing an S5800-54S switch in a 19-inch
rack
Table 1 Installing an S5800-54S switch in a 19-inch rack
Installation procedure
1. Attach the mounting
brackets to the switch.
2. Attach chassis rails to the
switch.
3. Install cage nuts in the rack
posts.
4. Attach slide rails to the
rack posts.
5. Connect the grounding
cable to the primary
grounding point
1
Remarks Installation diagram
•
For mounting near the power
modules, see
Required
•
For mounting near the ports,
see
•
For mounting near the ports,
see
Required
•
For mounting near the power
modules, see
Required See Figure
Required See Figure
Optional See Figure
6
2
Figure 8.
Figure 9.
Figure 8.
Figure 9.
10.
11.
12.