Faqs - Panasonic TX-26LX60A Operating Instructions Manual

FAQs

Before requesting service or assistance, please follow these simple guides to resolve the problem.
If problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care Centre
for assistance.
White spots or shadow
images (noise)
•
Check the position, direction,
and connection of the aerial.
Operating temperature
•
The LCD TV radiates heat and
some sections may become warm.
This is not a problem for
performance or quality.
Ensure TV is correctly installed as
detailed on page 5.
There may be red spots,
blue spots, green spots and
black spots on the screen.
[Pixel Statement (LCD)]
•
An image on an LCD panel is
created by many dots known as
pixels. The more pixels on the
panel, the more detailed image can
be displayed. To create a colour
image each pixel is made up of
three tiny coloured dots (1 each of
red, green and blue). This gives
a total far in excess of one million
individual dots manufactured
into the panel. Each one of three
dots is precisely controlled by the
electronics of the TV to produce
the picture.
•
Whilst Panasonic maintains the
highest standards in manufacturing
technology and processes in the
construction of these panels,
there are a number of allowable
Pixel/Dot failures that would still
allow the panel to be defi ned as
a good panel. It is not possible to
guarantee absolutely no pixel loss.
Pictures from an
STILL
equipment are unusual
SURROUND ASPECT
when the equipment is
R-TUNE N
connected via HDMI
•
OK
Is the HDMI cable connected properly?
(p. 22)
MENU TV/AV
•
Turn Off the TV unit and equipment,
then turn them On again.
•
Check an input signal from the equipment.
TV/TEXT F.P. INDEX HOLD
(p. 26)
•
1 2 3
Use an equipment compliant with
EIA/CEA-861/861B.
•
4 5 6
Using DVI connection, see page 23.
7 8 9
0
VCR DVD
REC
The remote control
does not work
•
Are the batteries installed correctly?
(p. 6)
•
TV
Has the TV unit been switched On?
•
Has the battery run down?
27