Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Billi Manuals
  4. Plumbing Product
  5. B-5000 Sparkling
  6. Installation manual

Billi B-5000 Sparkling Installation Manual

Tap option xl
Hide thumbs Also See for B-5000 Sparkling:
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
Installation guide
B-5000 Sparkling
Tap option XL

Advertisement

loading
Need help?

Need help?

Do you have a question about the B-5000 Sparkling and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Billi B-5000 Sparkling

Summary of Contents for Billi B-5000 Sparkling

  • Page 1 Installation guide B-5000 Sparkling Tap option XL...

  • Page 2: Installation Requirements

    Two 3 pin 10 amp GPOs are required. A dedicated circuit should be provided and must be fitted with an earth leakage protection device (RCD). An externally fitted RCD device is acceptable. Both B-5000 Sparkling modules are supplied with a 1 metre flex cord and plug.
  • Page 3 Installation requirements. Chilled Water Module Dimensions Boiling Water Module Dimensions 240mm 325mm 20mm 20mm 180mm 365mm 385mm 385mm 340mm 340mm FRONT SIDE FRONT SIDE 325mm 365mm 240mm 180mm Diagram 3a Diagram 3b B-5000 Sparking Suggested Layout A (Plan) B-5000 Sparking Suggested Layout B (Plan) 620mm 620mm 555mm...

  • Page 4: Installing The Dispenser

    Installing the dispenser. IMPORTANT: This Billi appliance is to be installed by a licensed tradesperson in accordance with AS 3500.4 or AS/NZ 3500.4.2 and in compliance with applicable state regulatory requirements. For correct operation of this appliance, it is essential to observe the manufacturer’s instructions. 1.
  • Page 5 Installing underbench modules. 1. Flush Water Supply —Dispenser to Boiling Water Module B-5000 Sparking Top View Flush water supply pipework before installing a) Push red silicon tube onto barb on Boiling the underbench unit by connecting 600mm Water Module labelled “BOILING (RED)” and dispenser flexible braided hose to the supply tap and secure with spring clamp.
  • Page 6 Commissioning. 4. Set Chilled Water Temperature 1. Turn on Water Supply Set the desired water temperature using Turn on water supply and ensure that there temperature control knob. Refer to are no leaks. Remove front panel of unit and B-5000 Sparking User Guide. remove packing foam from under filter canister.

  • Page 7: Installation And Commissioning Checklist

    Commissioning. WARNINGS. INSTALLATION AND For continued safety of this appliance COMMISSIONING CHECKLIST it must be installed, operated and Unit is set to reflect correct tap style maintained in accordance with the Filter packing foam removed from manufacturer’s instructions. under filter canister. —...