Table of Contents
Advertisement
Setup for MULTI DISPLAY
8
AI-synchronization
Adjusts brightness of displays when using MULTI DISPLAY.
Note:
If you set AI-synchronization to On, the following menus will be unavailable and these settings will be fi xed to the initial
values.
Picture menu: Colour, Hue
9
ID Remote Control Function
You can set the remote control ID when you want to use this remote control on one of several different displays.
1
Switch
to
2
Press the
button on the remote control.
3
Press one of
-
4
Press one of
-
Notes:
• The numbers in 2, 3 and 4 should be set up quickly.
• Adjustable ID number range is 0 - 99.
• If a number button is pressed more than two times, the fi rst two numbers become the ID number for the remote
control.
ID remote control button operation
The operation is the same as normal remote control except for the
ID Cancellation
Press
button on remote control. (This has the same effect as pressing the
Notes:
• Set the Remote ID "On" to operate the ID remote control.
If remote ID is set to "On", you can use the remote control without identical ID number during option menu display.
(see page 45)
• The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is
not the same as the ID select number (see page 45).
36
Press to select AI-synchronization.
Press to select "Off" , "On".
The brightness depends on
each display's setting.
Off
Press twice to exit from Setup.
on the right side.
,
for the tens digit setting.
,
for the units digit setting.
Equalize the brightness of
all the displays.
On
button.
,
MULTI DISPLAY Setup
Off
MULTI DISPLAY Setup
Horizontal Scale
× 2
Vertical Scale
× 2
Seam hides video
Off
Location
A1
AI-synchronization
Off
,
buttons at the same time.)
Hide quick links:
Advertisement
Table of Contents
