Vivitar DVR 914HD User Manual page 25

The camcorder's LED busy light turns on and blinks. All icons disappear and the
elapsed time appears on the top right corner of the LCD screen along with a blinking
REC
icon that indicates the recording is in progress.
 PAUSE: Press the DOWN (WIFI) button to pause the recording.
 STOP: Press the SHUTTER/OK button again to stop the video recording.
4. The video is automatically saved to the camcorder's Micro SD Memory card.
NOTE:
 In Car Carrying Mode, a passage of video is kept every three minutes in recording. After the
memory card is full, the earliest passage will be deleted, and video will be recorded in a
circulating way.
 To have the Car Carrying Mode be the default mode when powering on your camcorder, enter
the Car Carrying Mode then shutdown the camcorder. When you power on your camcorder
the next time it will be by default in the Car Carrying Video Capture Mode.
You can also connect the camcorder to a USB slot in your car and when turning on the
camcorder it automatically opens to the Car Carrying Mode and you can begin capturing your
video in this mode.
 After recording the video, the updated amount of available time left to capture additional
videos as per your memory card size and selected resolution size appears on the LCD
screen.
 If the memory card is full or the battery level is low, the camera will automatically stop
recording the video.
 When using the Waterproof Case, make sure to set mode and camcorder settings before
placing it into the case.
24